Revision 2.6
Page 33 of 53
Intuitive Mercury 6-5M Controller with TDB
www.resourcedm.com
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Change Over
Icon
Properties
Match Date
Icon
Properties
Input:
Demand required. Either Enable 1 or 2 will be turned on
when this input is activated and will off when the input is
deactivated. The output activated will vary depending on
whether or not the Swap input has been enabled.
Swap:
When activated the Enable output current operating will be
turned off and the alternative Enable output turned on
(Proof dependant). If the Swap input has never been
activated then only Enable 1 will be activated by the Input.
Proof 1 & 2:
If used a proof signal must be returned when the
associated Enable output is activated. If the proof is
returned within the Delay parameter time the Enable output
stays on, if not the associated Enable output is turned off
and the alternative Enable output is turned on.
Note
If
Proof inputs are not required then a digital setting block set
to “On” must be used to bypass the Proof input(‘s).
Delay:
Time delay associated to Proof 1&2
Enable 1:
Digital Output.
Fail 1:
Activated if Proof 1 is not returned within the allotted time
after Enable 1 is turned on.
Enable 2:
Digital Output.
Fail 2:
Activated if Proof 2 is not returned within the
allotted time after Enable 2 is turned on.
Input
Swap
Proof 1
Proof 2
Delay
Enable 1
Fail 1
Enable 2
Fail 2
Day
Month
Year
Match Date
The “Match Date” output is active when the date
entered matches the Real Time Clock (RTC) within
the controller.
Day
Enter a value between 1 and 31
Month
Enter a value between 1 and 12
Year
Enter a value between 00 and 99
Output stays on for 24 Hours until the date changes
The block can also be used in conjunction with the
Date and Time Block.
