Resfab CR-40F, Instruction Manual

Page: 5 / 32

Resfab Equipment Inc. CR-40F & CR-60F
ELECTRICAL INSTALLATION
AND CONNECTION
INSTALLATION
1. All fryers must be installed with an approved hood and
fire suppression system. Check local codes for
compliance.
ELECTRICAL
CONNECTION
!
WARNING
The warranty will be void if the fryer is connected to any
voltage other than the one indicated on the name plate.
!
WARNING
The fryer must be safely grounded
according to your local electric code to avoid
electrical shocks.
1. The installation must meet all local codes, state codes and
country regulations.
2.
The fryer must be connected by a professional
electrician.
3.
Verify the electrical values on the name plate of the fryer
to be sure it's in accordance with your building power
supply.
4.
Use a minimum AWG electric cable according to your
local regulation.
5.
It is recommended to use a dedicated electrical circuit
for the fryer. Refer to the electrical diagrams at pages 22
to 25 of this manual.