Resfab CR-40F, Instruction Manual

Page: 3 / 32

Resfab Equipment Inc. CR-40F & CR-60F
Warranty: Two Year Parts & Labor
All Resfab products are warranted to the original purchaser to be free from defect in
material and workmanship for a period of 2 years from the date of original installation,
providing the equipment has been unaltered, properly installed and maintained in
accordance with Resfab’s installation manuals.
Resfab agrees to repair or replace defective parts due to flaws in material or workmanship
during the warranty period. Labor to repair or replace defective parts shall be warranted
when pre-approved and performed by an authorized Resfab service agency. Travel over
50 miles, holiday and overtime labor charges are
not covered.
All repairs must be authorized by the factory. Non authorized repairs will not be
reimbursed.
Resfab’s warranty is limited and it does not cover the following; replacement of
light-bulbs and fuses, glass breakage, resetting of pumps or a high-limit switch,
replacement of o-rings and/or gaskets, tightening of loose fittings, minor
adjustments, equipment maintenance or cleaning, non stick coatings, thermostat
capillaries and bulbs, and/or any loss of product or profit resulting from
malfunction.
Any attempt by unauthorized personnel to service the equipment, abusive use, and/or lack
of maintenance may void the warranty (this is completely at Resfab’s discretion).