Resfab Equipment Inc.
CR-40F & CR-60F
MULTI PROGRAM CONTROLLER
HEAT
O
SCREEN DISPLAY
UP ARROW
DOWN ARROW
MULTI PROGRAM
CONTROLER
INFORMATION
The Resfab's multi program controller can hold up to 40
different menus.
The 2 keys "
IDLE ONE TEMP
(250
º
F)
" and "
IDLE
TWO TEMP
(200
ºF)
" have been factory programmed.
To modify the set point temperature of these 2 keys, go
to section "Programmation of multi programme
controller", section "Modification of IDLE set point".
Use these keys to decrease the oil temperature when the
fryer is not going to be use for a while. In addition of
the energy saving, by using those keys, it will help to
increase the oil life and its quality.
!
IMPORTANT
Temperature will increase of 25
º
F per minute
approximately.
O
IDLE
ONE
TEMP
O
IDLE
TWO
TEMP
O
DOWN
O
UP
O
MENU
SELECT
O
START
/
STOP
Summary of Contents for CR-40F
