Resfab CR-40F, Instruction Manual

Page: 15 / 32

Resfab Equipment Inc. CR-40F & CR-60F
FILTERING OIL
(Continuation)
PROCEDURES
(continuation)
6.
While the oil is draining into the filter, stir the oil in the pot
to make sure that all breaded residues will go through the
drain.
7.
Close the ball valve by moving the drain valve lever to
position "close". (You may leave the ball valve open for
recirculation).
8.
Select with the left lever if you want the oil back to the pot
or rinse/discharge the oil
9.
Turn the filter switch on.
10.
The oil will automatically be pumped back into the fryer pot
or into the discharge hose.
11.
Turn the filter switch off.
12.
Turn the power switch off or on fryer position.
13.
Change the filter if needed.
DANGER
BURN HAZARD / HOT OIL
!
- Never move the filter reservoir with hot oil.
- Never use the filter reservoir to discard oil.
Serious injuries will result from contact with hot oil.