-14-
4.1.3 Manually Recording CDs
With Auto-Rip disabled, load a CD into the CD tray of your AudioReQuest unit.
AudioReQuest will read the CD and place the tracks in the Songs column of the
AudioReQuest Navigation Screen.
To record an entire CD, move the cursor over CD and press the RECORD (F7) button on the
remote. AudioReQuest will open the Encoder Setup Screen. If the CD was not found on the
database, it is suggested you manually enter information.
In the Encoder Setup screen, you can change the Title
Prefix, Artist, Album, Year, Basic Genre, Extended Genre,
and Playlist the songs will be put in. If you enter a playlist
not already on the system, it will be created. The title prefix
will label each track with the prefix followed by the track
number. For example: White Album 1, White Album 2, etc.
Use the letters and numbers on your remote or keyboard to
enter in this information. NOTE: To switch between
fields, use the directional arrows. Do NOT press
ENTER (ENTER) - this will start the recording process.
To start recording, press the Enter Button on the remote
control. AudioReQuest will open the Encoder Progress Screen displaying the recording
progress.
To record a single song from a CD, move the cursor over the song you wish to record and
press RECORD (F7). If you wish to record more than one song, SELECT (F12) each song
and then press the RECORD (F7) button.
4 . 3 R e c o r d i n g f r o m L i n e - I n ( S o m e m o d e l s o n l y )
Certain models of AudioReQuest are capable of recording songs from any other analog audio
device through the unit’s Line-In connections. You can record all of your favorite radio
programs and audio cassettes, even 8-tracks!
To record a song using the Line-In connection you must
first connect the analog device you wish to record from to
AudioReQuest’s Line-In connectors in the rear of the unit.
Make sure both units are completely turned off before
connecting. After you have connected your analog device
to AudioReQuest and powered on both devices, press the
MENU (F3) button on the remote control to open the Menu
Screen. Select the Line-In option, and Record from the next
menu. You can also press the RECORD (F7) button if you
are playing from Line-In. See section 5.4.
AudioReQuest will prompt you to name the Album, Artist, and Song. Use the alphabet
buttons to enter the information. AudioReQuest will also ask you to assign a Line-In Level to
adjust the volume of the song. To adjust the Line-In Level, use the slider bar located on the
screen. Use the left and right arrows on the remote control to adjust the slider bar. Lower
(left) reduces the Line-In recording level and makes the audio quieter. Higher (right)
increases the Line-In recording level and makes the audio louder. Place the cursor over the
“OK” icon and press ENTER (ENTER) when you are ready to record. (If you are recording
from a cassette or other device, you should simultaneously press PLAY on that device and
ENTER (ENTER) on the AudioReQuest). To stop recording, Press ENTER (ENTER) again or
STOP (F5).
Summary of Contents for AudioReQuest F.Series
Page 1: ...AudioReQuest USER MANUAL USER MANUAL...
Page 43: ......