Request AudioReQuest F.Series, User Manual

Page: 19 / 44

-17-
5 . 4 P l a y i n g f r o m L i n e - I n ( S u p p o r t e d U n i t s O n l y )
A unique feature of AudioReQuest is its ability to play music from almost any analog device
such as audiocassettes and radio through its Line-In connections and enjoy the animations
and visuals that AudioReQuest provides.
1. Connect an analog device to AudioReQuest through the unit’s Line-In connectors located
on the rear panel. Make sure both units are completely off before you connect the
analog device to AudioReQuest. Turn on the units.
2. When fully booted, press the MENU (F3) button on the remote control
3. Move the cursor over the Line-In option and press ENTER (ENTER).
4. Highlight the Play option and press ENTER (ENTER) to begin playing a song from the
analog device. (Make sure the analog device is playing.)
You can also then record from Line-in by pressing the RECORD (F7) button. See Section 4
for more information.
5 . 5 Q u e u e / N o w P l a y i n g
The Queue function is a special feature of your new AudioReQuest. You can create an “on-
the-fly” playlist where you can add songs to the end of the queue dynamically as you listen
to music, similar to adding songs in a bar jukebox. Move the cursor to the Artist, Album,
Playlist, or song you wish to add and press the QUEUE Command: ALT-E (F11). You can
also select multiple songs, artists, albums, or playlists with the SELECT (F12) button and
add them with the QUEUE Command. See Section 6.3 for more info on SELECT (F12).
To view the songs that you have selected, place the cursor over the NOW PLAYING
category, or press the NOW PLAYING (SHIFT+F5) button on the remote control. To make
this temporary playlist into a permanent playlist on a Pro unit, press MENU (F3)
→
New
Playlist
→
From Now Playing, then name the new playlist.
If you are playing a song previous to adding a song, artist, album, or playlist to the Queue,
that song will continue to play until the end and the next song will be the first Queued song.
To delete a song from the NOW PLAYING list, select the song and press the DELETE
Command: ALT+B (DELETE). You cannot delete the currently playing song until you press
STOP (F5). See Section 6 for more details on editing, copying, and deleting a playlist.
Playing a new selection using the PLAY or PLAY NOW commands will replace the currently
playing music but music added by QUEUE will play after the previously queued music
finishes playing.
To clear the NOW PLAYING category and the QUEUE feature, press CLEAR NOW PLAYING
(ALT+NOW PLAYING) on the remote or press STOP (F5) three times quickly.