ADDRESS NUMBER VERIFICATION
1. Iconyx steerable column loudspeakers are digitally controlled and each 8-channel module must
have a separate and distinct address number. The address number for each module is set using a
BCD (Binary Coded Decimal) coding system and 8 on/off dip switches. The switches are located
behind each module’s rear access plate.
The switches are set at the factory based on the size and quantity of steerable column loudspeakers
ordered. You may want to check and record these settings before installing the loudspeakers. It is a
lot easier to do it now than it will be after the loudspeakers are installed.
2. Remove the access plate(s) and locate the switches. Each 8-channel module will have an access
plate.
Notice that there are 8 orange on/off Dip switches. Switches 1 to 4 are labeled as “ONES” and
switches 5 to 8 are labeled “TENS”. The switches are “on” when set to the position closest to the
numbers and “off” (--) when set to the other position.
The switch settings for modules 1 to 16 follow:
Owners Manual
9
Switch Number
Module Number
1
2
3
4
5
6
7
8
1
ON
2
ON
3
ON
ON
4
ON
5
ON
ON
6
ON
ON
7
ON
ON
ON
8
ON
9
ON
ON
10
ON
11
ON
ON
12
ON
ON
13
ON
ON
ON
14
ON
ON
15
ON
ON
ON
16
ON
ON
ON
