Owners Manual
22
USING BEAMWARE
1. To open BeamWare, click on the BeamWare icon the installer placed on your desktop. This will
start BeamWare and open the screen shown below.
2. Before you go any further, you should first verify that you are using the correct measurement
system (feet or meters). The default measurement system is Imperial (feet), but it’s always best to
check.
If you want to change it, go to the
File
pull down menu and click on
Options
or right click on the
BeamWare Project window in the center of the screen. Either method will open the Options screen
shown here. Make the change and then click on
OK
to approve the change.
