Owners Manual
10
The switch settings for modules 17 to 32 are:
3. Common practice is to number the 8-channel modules consecutively starting at 01 with the bottom
module. In an IC32, for example, the bottom module would be 01 and the ones on top of it num-
bered 02, 03 and 04. If the system had two IC32’s, the second IC32 would have its modules labeled
05, 06, 07 and 08 with number 05 being the bottom module.
SOFTWARE INSTALLATION & SETUP
Iconyx steerable column loudspeakers are digitally controlled and a PC with appropriate software is
needed during installation and setup. Once the setup is completed the PC is no longer needed
unless the system parameters need to be adjusted or changed.
The Iconyx software requires a PC meeting at least the following basic requirements:
Processor Speed:
800 MHz Pentium or higher
Memory:
256 MB or higher
Interface:
At least one available USB port compliant with USB1.1
Operating System:
Windows 2000 SP4 or Windows XP SP1 or higher
Operating System Add-Ons:
.NET Framework (provided with the Iconyx software)
Screen Resolution:
1024 x 768 or higher
Browser:
Internet Explorer v5.0 or higher
Note that Windows 95 and Windows 98 are not supported.
A typical system layout is shown below.
RS422 Contol Cable
Audio Cable
From Audio Source
17
ON
ON
ON
ON
18
ON
ON
19
ON
ON
ON
20
ON
21
ON
ON
22
ON
ON
23
ON
ON
ON
24
ON
ON
25
ON
ON
ON
26
ON
ON
ON
27
ON
ON
ON
ON
28
ON
ON
29
ON
ON
ON
30
ON
ON
31
ON
ON
ON
32
ON
ON
ON
