Owners Manual
As you can see from the flow chart, Canvas places control of the column array’s frequency response
and level at your fingertips.
Clicking on the
Tone
button opens the tone control screen shown below.
It gives you total control of both the low and high frequency response.
The
High Pass Filter
button inserts a high pass filter into the signal chain and allow you to dial in any
low frequency roll off you desire. It was preset to 100 Hz with a 24 dB per octave slope. Please don’t
attempt to set it to a lower frequency as this could lead to transducer failures. If you need more lows
in the system, add a subwoofer. Increasing the frequency is fine since this provides greater protec-
tion for the transducers.
38
