Owners Manual
INSTALLING BEAMWARE
1. Click on the
Install BeamWare
button to activate the BeamWare installer program.
If you have an old version of BeamWare installed on your computer, the window shown below will
appear. The old version needs to be uninstalled before the new BeamWare version is installed.
Select
Remove RHBeamWare
and click on
OK
. This will remove the old version and close the setup
window and you will need to restart the setup program by clicking on the
Install BeamWare
button.
If you do not have an old version of BeamWare on your computer or if you have just uninstalled the
old version, the window shown below will open. Note that the “Remove” or “Repair” options no
longer appear.
Click on
Next
to start the installer. This will open the Select Installation Window shown on the next
page.
18
