Software Installation
The Iconyx Software CD you received with your Steerable Column Loudspeaker includes the driver needed by the USB to RS422
adapter plus 2 software programs that need to be installed on your computer. These are:
1. BeamWare 2
BeamWare 2 is used to design the beam’s shape and aiming and develop the FIR filters that control the beam’s shape and aiming. It
is also used to identify the arrays used in the system and to install in them the FIR filters that control their aiming.
2. Canvas
Canvas is used to adjust (fine tune) the level and EQ settings of the individual column arrays to optimize their performance. It is
especially useful in multi-column distributed systems for balancing levels during final commissioning.
Inserting the Iconyx Software CD into the computer’s CD-ROM drive will open the splash (menu) screen shown below.here.
INSTALLING THE USB TO RS422 ADAPTER DRIVERS
Normally the USB to RS422 adapter and serial extension cable is installed before any of the software programs. However, the USB
to RS422 adapter and the software programs can be installed in any order.
The USB to RS422 adapter is required for communications (data transfer) between the Iconyx column arrays and the BeamWare II
and Canvas software programs. The Iconyx Software CD includes the driver needed to install the USB to RS422 adapter.
Before starting the installation make sure the USB to RS422 converter and serial extension cable is not connected to any of
the Iconyx column arrays.
FOR WINDOWS XP USERS
IC Live Users Manual, ICL-F & ICL-F-DUAL
9
All manuals and user guides at all-guides.com
