As you can see from the flow chart, Canvas places control of the column array’s frequency response and level at your fingertips.
Clicking on the Tone button opens the tone control screen shown below.
It gives you total control of both the low and high frequency response.
The High Pass Filter button inserts a high pass filter into the signal chain and allows you to dial in any low frequency roll off you desire. It
was preset to 100 Hz with a 24 dB per octave slope. Please don’t attempt to set it to a lower frequency as this could lead to transducer
failures. If you need more lows in the system, add a subwoofer. Increasing the frequency is fine since this provides greater protection for
the transducers.
30
IC Live Users Manual, ICL-F & ICL-F-DUAL
All manuals and user guides at all-guides.com
