Pressing the Start Fault Monitoring will initiate the fault moni-
toring and the program will list its findings in the monitoring
window. Note that the State, Temperature and Last Check
columns now include information. The red bar following
Unknown has disappeared and been replaced with a green bar
following OK.
The program checks each amplifier module and reports any
failures such as loss of power. It also checks the amplifiers
operating temperature and reports any “over-temperature” find-
ings.
If a fault is detected, the nature of the fault is reported and the
arrays listing turns red to call attention to the failure.
The program also keeps an Event Log and records the time of
the event (failure or disconnect), the nature of the event, and
the time the unit returned to service.
IC Live Users Manual, ICL-F & ICL-F-DUAL
37
All manuals and user guides at all-guides.com
