1. With the PC on and Windows running,
insert the Iconyx Software CD into your CD
drive. Connect the USB to RS422 adapter to
an available USB1.1 compatible USB port.
Windows will prompt you with the following
message. (If you do not receive this mes-
sage window, skip ahead to page 17 and the
section “If Windows Did Not Prompt To Install
Drivers automatically).Select the option to
not search Windows Update by clicking on
“No, not this time” and then on Next to con-
tinue.
2. You will be prompted with the “Found
New Hardware Wizard”dialog screen.
Select “Install the software automatically
(Recommended)” and click on Next.
Windows will find the appropriate driver
automatically.
3. After Windows finds the appropriate driv-
er, you will be notified that the driver has not
passed Windows Logo testing with the fol-
lowing message. Click on “Continue
Anyway”. Windows will finish the driver
installation. Click on “Finish” when prompt-
ed.
4. Windows will now find another hardware
device, which is the Serial Port device of the
adapter cable. Again you will be prompted
with the option to search Windows Update.
Click “No, not this time” and then Next to
continue.
5. You will be prompted with the following
screen. Click “Install the software automati-
cally (Recommended)” and then click on
Next. Windows will find the appropriate driver
automatically.
After Windows finds the appropriate driver,
you will again be notified that the driver has
not passed Windows Logo testing with the
following message. Click on “Continue
Anyway”. Windows will finish the driver
installation. Click “Finish” when prompted.
You have now completed the USB to RS422
adapter driver installation.
FOR WINDOWS 2000 USERS
10
IC Live Users Manual, ICL-F & ICL-F-DUAL
All manuals and user guides at all-guides.com
