1. With the PC on and Windows running, insert the
Iconyx Software CD into your CD drive. Connect
the USB to RS422 adapter to an available USB1.1
compatible USB port. Windows will notify you that
it has found new hardware (USB to Serial Cable).
Click on Next to continue and start the Found New
Hardware Wizard. Click on Next to continue.and
open the Install Hardware Device Drivers dialog
screen.
(Note: If you do not receive this message window,
skip ahead to page 17 and the section “If Windows
Did Not Prompt To Install Drivers automatically”.)
2. You will be prompted with the following screen.
Click “Search for a suitable driver for my device
(Recommended) and then click on Next.
3. You will be prompted to search for the location of
the drivers. Click CD ROM Drives, then click Next.
After Windows finds the appropriate driver, you will
be prompted to install it, click on Next.
After Windows finishes installing the driver, click
“Finish” when prompted.
4. Windows will now find another hardware device,
which is the Serial Port device of the adapter cable.
Again, Windows will notify you that it found new
hardware (USB Serial Port) and start the Found
New Hardware Wizard. Click on Next to continue.
5. You will be prompted with the following screen.
Click “Search for a suitable driver for my device
(Recommended)” and then click Next.
6. You will be prompted for a location to search for
the drivers. Click CD ROM Drives, then click on
Next. After Windows finds the appropriate driver,
you will be prompted to install it, click Next.
After Windows finishes installing the driver, click on
“Finish” when prompted. You have now finished the
USB to RS422 adapter driver installation.
IF WINDOWS DID NOT PROMPT TO INSTALL
DRIVERS AUTOMATICALLY
IC Live Users Manual, ICL-F & ICL-F-DUAL
11
All manuals and user guides at all-guides.com
all-guides.com
