R0E521000CPE00 User’s Manual
1. Outline
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 19 of 92
Table 1.6 R0E521000CPE00 specifications (2)
Power supply for emulator
DC5.0V±5%/(2A) externally supplied (Prepare a power supply which complies
with CE marking requirements separately.)
Host machine interface
USB
*3
(USB 1.1 full-speed, mini-B standard connector)
*3: If using this product when the voltage is less than 2.7V, the JP1 of the R0E521000EPBM0 should be set to EXT.
1.4 Operating Environment
Be sure to use this emulator with the operating environmental of the emulator and host machine listed in Tables 1.7 and 1.8.
Table 1.7 Operating environmental conditions
Item Description
Operating temperature
5 to 35°C (no dew)
Storage temperature
-10 to 60°C (no dew)
Table 1.8 Operating environment of the host machine
Item Description
Host machine
IBM PC/AT compatibles
OS
Windows® XP, Windows® 2000 *
1
CPU
Pentium III 600 MHz or more recommended
Interface
USB 1.1 full-speed*
2
Memory
128 MB or greater (more than 10 times the file size of the load
module) recommended
Hard disk
Emulator debugger installation needs 100 MB or more free
space. (In view of swap area, keep another free space which is
more than twice the memory capacity. (More than four times the
memory capacity recommended.))
Display resolution
1024 × 768 or greater recommended
Pointing device such as mouse
Mouse or any other pointing device usable with the above OS
that can be connected to the main body of the host machine.
CD drive
Needed to install the emulator debugger or refer to the user’s
manual
*1 Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
*2 Can be connected to the USB2.0 port of the host machine.
With the USB interface of this product, not all hardware (such as host machine, USB devices, USB hub) combination will
work and guaranteed.
