R0E521000CPE00 User’s Manual
2. Setup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 43 of 92
2.9.6 Connecting to a 64-pin 0.8mm pitch LQFP Foot Pattern
Figure 2.25 shows a procedure of connecting to a 64-pin 0.8mm pitch LQFP foot pattern on the user system using the
R0E5212BACFG00 (included with the R0E5212BACPE00). For details on the R0E5212BACFG00, refer to its user's manual.
(1) Mount the NQPACK064SA160 included with the R0E5212BACFG00 to the user system.
(2) Attach the YQPACK064SA included with the R0E5212BACFG00 to the NQPACK064SA160 and secure it with the YQ-
GUIDE's.
(3) Attach the R0E5212BACFG00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E5212BACFG00 to the YQPACK064SA.
Figure 2.25 Connecting to a 64-pin 0.8mm pitch LQFP foot pattern
CAUTION
Note on Connecting to the User System:
z
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
IMPORTANT
Notes on Connectors of the Converter Board:
z
The connectors of the R0E521000CPE00 and R0E5212BACFG00 are guaranteed for only 50 insertion/removal
iterations.
z
The connectors of the R0E5212BACFG00 and YQPACK064SA are guaranteed for only 100 insertion/removal
iterations.
R0E5212BAC
Ｆ
G00
YQ-GUIDE(
×
4) *
YQPACK064SA *
NQPACK064SA160 *
R0E521000CPE00
FLASH version
MCU
On-board evaluation
HQPACK064SA160
(not included)
● No. 1 pin
*: These items are included with the R0E5212BACFG00
64-pin 0.8mm pitch LQFP
(PLQP0064GA-A) foot pattern
(1)
(2)
(3)
(4)
