R0E521000CPE00 User’s Manual
2. Setup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 42 of 92
2.9.5 Connecting to a 52-pin 0.65mm pitch LQFP Foot Pattern
Figure 2.24 shows a procedure of connecting to a 52-pin 0.65mm pitch LQFP foot pattern on the user system using the
R0E521258CFJ00 (included with the R0E521258CPE00). For details on the R0E521258CFJ00, refer to its user's manual.
(1) Mount the NQPACK052SB included with the R0E521258CFJ00 to the user system.
(2) Attach the YQPACK052SB included with the R0E521258CFJ00 to the NQPACK052SB and secure it with the YQ-
GUIDE's.
(3) Attach the R0E521258CFJ00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E521258CFJ00 to the YQPACK052SB.
Figure 2.24 Connecting to a 52-pin 0.65mm pitch LQFP foot pattern
CAUTION
Note on Connecting to the User System:
z
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
IMPORTANT
Notes on Connectors of the Converter Board:
z
The connectors of the R0E521000CPE00 and R0E521258CFJ00 are guaranteed for only 50 insertion/removal
iterations.
z
The connectors of the R0E521258CFJ00 and YQPACK052SB are guaranteed for only 100 insertion/removal
iterations.
YQ-GUIDE(×4) *
YQPACK052SB *
NQPACK052SB *
R0E521000CPE00
R0E521258CFJ00
FLASH version
MCU
On-board evaluation
HQPACK052SB
(not included)
●: N o. 1 p in
*: These items are included with the R 0E521258C
Ｆ
J00 package.
52-pin 0.65mm pitch LQFP
(PLQP0052JA-A) foot pattern
(1)
(2)
(3)
(4)
