R0E521000CPE00 User’s Manual
2. Setup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 41 of 92
2.9.4 Connecting to a 48-pin 0.5mm pitch LQFP Foot Pattern
Figure 2.23 shows a procedure of connecting to a 48-pin 0.5mm pitch LQFP foot pattern on the user system using the
R0E521237CFK00 (included with the R0E521237CPE00). For details on the R0E521237CFK00, refer to its user's manual.
(1) Mount the NQPACK048SD included with the R0E521237CFK00 to the user system.
(2) Attach the YQPACK048SD included with the R0E521237CFK00 to the NQPACK048SD and secure it with the YQ-
GUIDE's.
(3) Attach the R0E521237CFK00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E521237CFK00 to the YQPACK048SD.
Figure 2.23 Connecting to a 48-pin 0.5mm pitch LQFP foot pattern
CAUTION
Note on Connecting to the User System:
z
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
IMPORTANT
Notes on Connectors of the Converter Board:
z
The connectors of the R0E521000CPE00 and R0E521237CFK00 are guaranteed for only 50 insertion/removal
iterations.
z
The connectors of the R0E521237CFK00 and YQPACK048SD are guaranteed for only 100 insertion/removal
iterations.
YQ - GUIDE (x4) *
YQPACK048 SD *
NQPACK048 SD *
R0E521000CPE00
R0E521237CFK00
FLASH
version MCU
On -board evaluation
HQPACK048SD
(not included)
48-pin 0.5mm pitch LQFP
(PLQP0048KB-A) foot pattern
(1)
(2)
(3)
(4)
●
: No . 1 pin
*: These items are included with the R0E521237CFK00 package.
