R0E521000CPE00 User’s Manual
2. Setup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 39 of 92
2.9.2 Connecting to a 20-pin 0.65mm pitch LSSOP Foot Pattern
Figure 2.21 shows a procedure of connecting to a 20-pin 0.65mm pitch LSSOP foot pattern on the user system using the
R0E521174CSJ00 (included with the R0E521174CPE00). For details on the R0E521174CSJ00, refer to its user's manual.
(1) Mount the NSPACK20BG included with the R0E521174CSJ00 to the user system.
(2) Attach the YSPACK20BG included with the R0E521174CSJ00 to the NSPACK20BG, and secure it with the YS-
GUIDE's.
(3) Attach the R0E521174CSJ00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E521174CSJ00 to the YSPACK20BG.
Figure 2.21 Connecting to a 20-pin 0.65mm pitch LSSOP foot pattern
CAUTION
Note on Connecting to the User System:
z
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
IMPORTANT
Notes on Connectors of the Converter Board:
z
The connectors of the R0E521000CPE00 and R0E521174CSJ00 are guaranteed for only 50 insertion/removal
iterations.
z
The connectors of the R0E521174CSJ00 and YSPACK20BG are guaranteed for only 100 insertion/removal
iterations.
R0E521000CPE00
R0E521174CSJ00
(3)
FLASH
version MCU
On-board evaluation
HQPACK20BG
(not included)
YS-GUIDE (x2) *
YSPACK20BG *
NSPACK20BG *
20 -pin 0.65mm pitch LSSOP
(PLSP0020JB-A) foot pattern
(1)
(2)
(4)
●
: No. 1 pin
*: These items are included with the R0E521174CSJ00 package.
