Rena XPS-80 User Manual Download Page 94

Page: 94 / 115

RENA XPS-80/90

User Guide

6-10

15) Set ink system

This menu item allows the operator to select each cartridge posi-
tion and the type of “ink system” that each is using.

Note

: At this time, we have no device to support (hold) the bulk

ink system, for use in the XPS-80/90.

all

Selects all cartridge positions

Selects print unit U1

Selects print unit U2

abort selection

Set Cartridge:

all

Selects all cartridges in the previously selected print unit

Crt1

Selects cartridge 1

Crt2

Selects cartridge 2

Crt3

Selects cartridge 3

abort selection

Ink System:

cart

Standard ink cartridge (42 ml of ink).

bulk

Bulk ink system (370 ml of ink).

16) Special functions

This menu contains 13 submenus with functions which need to be
changed only rarely. It is described in Section 6.4.

SET INK SYSTEM: all

Ink System: cart

Set Cartridge: all

Summary of Contents for XPS-80




















































































































Search results

Summary of Contents for XPS-80

Reviews:

Brands by name

Popular brands

Rena XPS-80, User Manual

Search results

Summary of Contents for XPS-80

Reviews:

Brands by name

Popular brands