RENA XPS-80/90
User Guide
2-2
•
Never touch the print units while the printer is run-
ning! There is a danger of bruising and crushing in-
jury. Also be sure to keep long hair or any items of
clothing away from the printer while it is running.
•
Protect the printer from moisture.
•
Always unplug the printer before cleaning it.
•
Do not use any cleaning agents. Use a damp cloth.
•
You must unplug the printer and have it checked by
an authorized service technician in the following cir-
cumstances:
•
If the power cable or power plug has worn or been
damaged.
•
If water or another liquid has penetrated the printer.
•
If the printer does not operate properly even after the
operating instructions have been followed
.
•
If one of the printer parts or its housing is damaged.
•
If the printer shows marked discrepancies from nor-
mal operation.
•
Do not dismantle the printer beyond the level described in this
manual. Unauthorized persons must not open the housing.
Only authorized service personnel may carry out repairs.
•
Prohibition of conversions: all conversions or modifications
carried out by unauthorized persons are prohibited for rea-
sons of safety
.
2.2 Handling the print cartridges
•
Keep all print cartridges out of the reach of children.
•
Under normal circumstances, ink cannot run out of a car-
tridge. Wash off any ink spray, which gets onto the skin im-
mediately under running water. If any ink gets into your eyes,
rinse it out immediately with plenty of water and subsequently
consult a doctor.
•
Print cartridges must not be shaken, as ink may run out.
•
Install each print cartridge immediately after removing the
protective tab. Be sure not to exceed the expiry date.
