REMKO SLN 45, Operating And Installation Instructions

Page: 4 / 36

Safety notes
The units have been subjected to
extensive material, functional and
quality inspections prior to delivery.
However, dangers can result
from the units if they are used
improperly or not as intended by
untrained personnel.
The following notes must be
observed in full:
■
The units may not be installed
or operated in explosive
environments
■
The units must not be installed
or operated in atmospheres
containing oil, sulphur or salt
■
The units must not be exposed
to direct jets of water
■
An unobstructed air inlet and
air outlet must be guaranteed
at all times
■
The air-inlet grill must always
be kept free of dirt and loose
objects
■
The units must not be covered
during operation
■
Never stick foreign objects into
the units
■
All electrical cables on
the outside of the units must
be protected against damage
(e.g. by animals etc.)
■
The units are only permitted
to be set up or installed in
the intended position (upright)
■
Unobstructed and frost-proof
condensate drainage must
be ensured at all times
■
The unit connections must
always be established
according to the applicable
installation regulations
CAUTION
The units must be set up and
installed in such a way that
they are easily accessible
for monitoring, repair and
maintenance work.
4
REMKO SLN Series