REMKO SLN 45, Operating And Installation Instructions

Page: 28 / 36

Register Byte
Database
parameters
Min Max Hr. Description
8
14
Cond_temp1
(decimal)
-40 100 0
Condenser temperature:
Use as described above.
15
Cond_temp1
(fraction)
-40 100 0
9
16
Aux_temp
(fraction)
-40 100 0
Auxiliary probe temperature:
Use as described above.
17
Aux_temp
(fraction)
-40 100 0
10
18
Amb_temp
(decimal)
-40 100 0
Ambient air temperature:
Use as described above.
19
Amb_temp
(fraction)
-40 100 0
11
20
Amb_hum
(high byte)
0 100 0
Ambient air humidity:
High byte is insignificant and always contains
zero. Only low byte can be used.
21
Amb_hum
(low byte)
12
22 RH_set 40 95 40 Humidity setpoint.
23 RH_Fan 40 95 40 Humidity setpoint for extractor fan start.
13
24
Temp_set
(decimal)
0 36 0
Temperature setpoint:
Used in the same way as Evap_temp1.
25
Temp_set
(fraction)
16
30 Fail_start 0 1 0 Status of Fail_start mode.
31 SB_mode 0 1 0 Standby mode status.
17
32 DEH_mode 0 1 0 Dehumidification status.
33 Ice_mode 0 1 0 Defrosting mode.
18
34 LP_mode 0 1 0 LP fault mode status.
35 Sens_mode 0 1 0 Sensor fault mode status.
19
36 HP_mode 0 1 0 HP fault mode status.
37 Amb_mode 0 1 0 Ambient fault mode status.
20
38
AmbT_
mode
0 1 0 Ambient temperature fault mode status.
39
AmbRH_
mode
0 1 0 Ambient humidity fault mode status.
28
REMKO SLN Series