Code
Description
Range
160
CP570
Time Program of the zone selected by the user
0 = Schedule 1
1 = Schedule 2
2 = Schedule 3
3 = Cooling
0
CP660
Choice icon to display this zone
0 = None
1 = All
2 = Bedroom
3 = Livingroom
4 = Study
5 = Outdoor
6 = Kitchen
7 = Basement
8 = Swimming Pool
9 = DHW Tank
10 = DHW Electrical Tank
11 = DHW Layered Tank
12 = Internal Boiler Tank
13 = Time Program
1
CP670
Configuration of pairing room unit per zone
-
Tab.35
> FSB-WHB-HE-150-300 - Factory settings at installer level
Code
Description
Range
160
AP001
Blocking input setting (1: Full blocking, 2: Partial
blocking, 3: User reset locking)
1 = Full blocking
2 = Partial blocking
3 = User reset locking
4 = Backup Relieved
5 = Heat Pump Relieved
6 = HP & backup relieved
7 = High, Low Tariff
8 = Photovoltaic HP Only
9 = PV HP And backup
10 = Smart Grid ready
11 = Heating Cooling
1
AP006
Appliance will report low water pressure below this
value
0 bar - 6 bar
0,7
AP008
The appliance will wait x sec (0=off) for the release
contact to close in order to start the burner
0 Sec - 255 Sec
0
AP009
Burning hours before raising a service notification
100 Hours - 25500 Hours
17400
AP010
The type of service needed based on burn and
powered hours
0 = None
1 = Custom notification
2 = ABC notification
2
AP011
Hours powered to raise a service notification
100 Hours - 25500 Hours
17400
AP056
Enable outdoor sensor
0 = No outside sensor
1 = AF60
2 = QAC34
1
AP073
Outdoor temperature: upper limit for heating
1.5 °C - 60 °C
22
AP074
The heating is stopped. Hot water is maintained.
Force Summer Mode
0 = Off
1 = On
0
AP079
Inertia of the building used for heat up speed
0 - 255
0
AP080
Outside temperature below which the antifreeze
protection is activated
-32 °C - 10 °C
0
AP110
Parameter to activate the 2nd return sensor
0 = Inactive
1 = Active
0
CP000
Maximum Flow Temperature setpoint zone
0 °C - 90 °C
90
CP010
Zone flow temperature setpoint, used when the zone
is set to a fixed flow setpoint.
0 °C - 90 °C
90
9 Settings
7625116 - v.06 - 17102018
51
