page 3
2. Safety
2.1 General safety warnings
DANGER
This cylinder is unvented and as such becomes pressurised when in operation.
The combination of pressurisation and hot water could lead to serious physical injury if the safety instructions in this manual are not adhered to.
WARNING
#
Only competent persons having received adequate training are permitted to work on the appliance and the installation.
#
Do not tamper with any of the safety valves or controls supplied with the cylinder.
#
Before any work, switch off the mains supply to the appliance.
#
Do not switch on if there is a possibility that the water in the cylinder is frozen.
CAUTION
Do not operate immersion heaters until the cylinder has been filled with water.
2.2 Recommendations
WARNING
When handling the unit, take appropriate precautions for the weight of the unit.
Weights can be found in section 3, table 2.
CAUTION
Annual maintenance is recommended by a competent
person.
2.3 Specific safety instructions
Summary of Contents for 1000 Indirect
