THERMOJET
®
H-2000E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740121
Rev
15
Date
June 2020
Page
49
of
102
Condensate Purifier Assembly Maintenance
Maintaining and replacing the oil absorption media in the Condensate Purifier Assembly (CPA)
can be done while the ThermoJet is operating.
Replace oil absorption media sock if saturated. This absorption media sock should remain
effective for two to four weeks. Periodic visual inspection is the only way to determine if sock is
saturated.
To replace the absorption media sock locate the cover cap on the CPA housing. Remove the cap
and pull the media out of the housing.
Inspect the interior of the housing and clean as necessary. Install a new absorption media sock
and re-install the cover cap.
Locate the CPA cover
cap. Remove cap to
access the absorbent
media sock
