THERMOJET
®
G-3700E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740151
Rev
03
Date
June 2020
Page
74
of
111
•
Disconnect all electrical supply wiring. For power wiring connection locations reference
the
INSTALATION
section of this manual. Disconnect discharge (flare) connection. For
discharge (flare) connection location reference the
INSTALATION
section of this manual
The ThermoJet Oil Purifier is secured to its foundation by anchor bolts through mounting pads
around the perimeter of the cabinet. Unbolt the machine form its foundation to remove. The
cabinet is equipped with lifting lugs for lifting and moving. Use appropriate lifting and transport
equipment to remove this machinery.
Ensure that all previously connected sources of
electrical power are disconnected before opening the
ac power remote alarm enclosures and attempting to
disconnect electrical wiring alarm contacts
Do not tip or stand equipment on edge
NOTICE:
Equipment is fitted with lifting lugs. For safe
lifting and placement of equipment use
approved lifting cables and accessories
WARNING
Use suitable transport equipment for lifting and setting
the equipment into place. Ensure that the equipment is
secured prior to and during lifting and transport. Stand
clear of the all equipment while being maneuvered.
Crane and fork truck operators should be properly
trained in there operation.
