THERMOJET
®
G-3700E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740151
Rev
03
Date
June 2020
Page
47
of
111
Maintenance Checks
The following maintenance procedures should be performed at least on a monthly basis to help
insure proper system operation. If the any condition listed below is observed on a shorter interval
maintenance actions should be executed as those conditions are observed. If your operating
conditions are considered to be in an extremely dusty or humid environment, the maintenance
schedule should be accelerated. Consult with the nearest office/service center for further
discussion and recommendations.
The oil in the ThermoJet Oil Purifier and its
subassemblies may be contaminated with the
substances being removed from the processed oil.
Ensure that the methods used to manage and
dispose of these materials are in compliance with all
governing authorities and plant policies and
procedures.
NOTICE:
Wear appropriate personal protective gear.
When cleaning oil spills consult with your
lubricating oil supplier and the lubricating oil MSDS
documentation regarding safe guards and
Personal Protective Equipment (PPE)
requirements.
The oil filter will be filled with contaminated oil.
Ensure that the container used for receiving the
drained oils and other fluids are sufficiently large to
avoid spills.
In case of oil spillage, the user or other responsible
body must ensure appropriate cleanup and
decontamination is carried out. Reference
CLEANING
AND DECONTAMINATION
in the ROUTINE
MAINTENANCE section of this manual.
