Rehabed Leo Med Instructions For Use Manual Download Page 4 | Manualshive

Page: 4 / 56

Rehabed Leo Med Instructions For Use Manual Download Page 4

4

1.

I

NTRODUCTION

Thank you for your trust and purchase of our product. Before using the bed, please
read this instruction manual carefully and make sure it is fully understood. In the case
of any doubts concerning the installation, use or maintenance of the bed, please
contact the seller or the manufacturer.

1.1.

C

ONTACT

In order to get help with the installation, use or service of the product, as well as to
report an unexpected operation or to obtain any information regarding service,
warranty, sales or customer service concerning this product, please contact your seller,
distributor or (in case of doubt) with Reha-Bed Sp. z o.o. at the following address:

Reha-Bed Sp. z o.o.
Spacerowa 1 Street
41-

253 Czeladź

Poland

In service matters (including spare parts):

e-mail address:

[email protected]

phone: +48 519 842 766
phone: +48 608 727 090

Other issues:

e-mail address:

[email protected]

phone: +48 608 727 090

Each  serious  incident  connected  with  the  device  should  be  reported  to
Reha-Bed  Sp.  z  o.o.  and  the  competent  authority  of  the  Member  State,  where  the
device is used. Please provide the product serial number (LOT) in all correspondence.
You  can  find  it  on  the  identification  labels,  which  are  located  on  the  inside  of  the
backrest section frame and the leg section frame, as well as on the bottom of each bed
ends.

In order to receive support outside of Poland, please contact the local distribution
company, which sold you the device.

1.2.

T

O WHAT IT CONCERNS

?

This instruction manual applies to Leo MED beds consisting of 4-section mattress
platform with metal slats and electrically operated backrest and knee break.

All products are CE marked

–

in accordance with the EC Directive on medical devices

(2017/745 (MDR)).

1.3.

F

EATURES

▪

4 separate sections (movable back and leg section)

▪

Electrically controlled back and leg section position

▪

Mechanical adjustment of the foot section

▪

Auto contour – simultaneous adjustment of back and leg sections

«
...
2
3
4
5
6
...
»

Summary of Contents for Leo Med

























































Reviews:

No comments