Rehabed Leo Med, Instructions For Use Manual, Page: 16 / 56

16
6. B
ED ASSEMBLY AND PREPARING FOR USE
▪
Before attempting to assemble the bed, ensure these
instruction manual has been read and fully understood.
▪
Ensure a risk assessment in line with local health and safety
policy is undertaken to ensure that staff are not put at risk
when performing assembly activities.
▪
Pay special attention during assembly activities due to the
heavy weight of individual elements.
▪
The manufacturer recommends that the bed should be
assembled by two persons.
For assembly, clear the intended area, playing particular attention to the fact that any
movement of the bed will not be obstructed.
Apply the brakes to the castors.
6.1. F
ITTING ELECTRICAL SYSTEM
The bed is designed to be connected to a constant power supply at all times during
use. An auxiliary emergency power supply is available as an accessory to maintain
the bed's basic functions for a specified period of time if mains power is not
available (see section 10).
▪
The bed is delivered with fitted electrical system - the cables are matched to
the graphic on the control box with coloured tags. Ensure the cables are
connected correctly into the corresponding ports.
Without tag
=
Foot end
Without tag
=
Head end
Yellow tag
=
Leg rest
Black tag
=
Backrest
Handset
Note: The two bed ends are identical but plugging them into the correct port is
important for the tilt function to work as intended.