30
5
6
7
STORAGE
The device is to be stored in manufacturer’s packaging.
Climatic storage conditions:
air temperature
from +5 °С to +40 °С
relative air humidity
up to 80 % at the temperature of +15 ˚C
atmospheric pressure
100 +/- 4 KPa (750 +/- 30 mm Hg)
When preparing the device for storage, it is recommended to perform maintenance works
as described in paragraph 3.2.
Devices can be stored in stacks — up to 5 items.
TRANSPORTATION
The device is to be transported in the industrial packaging of the manufacturer (provided
in the delivery set). When preparing the device for shipping (impact load involved), install
the transportation batten (Figure 12, pos. 1) so that its screw is set against the button of
the pressing roller block (Figure 3, pos. 2). The button should be recessed by the screw for about
1 mm. Then put pieces of cardboard on the arrises and tighten plastic straps (Figure 12, pos. 2).
The device is to be stored in climatic conditions given in paragraph 5. Protect the device
from hitting and vibrations.
The device contains magnetized material packed in accordance with the requirements of
ICAO Doc 9284 AN/905. The device is allowed for transportation by passenger aircraft.
8
RECYCLING
Recycling of the device shall be carried out in conformity with the rules adopted at
the Manufacturer’s enterprise.
MANUFACTURER’S WARRANTY
The warranty period makes 24 months from the date of sale provided that all terms of
the given User’s Guide are observed. Do not remove any seals set by the manufacturer during
the whole warranty period.
Storage period makes ___ months from the date of manufacturing.
Mean lifetime makes 5 years.
1 — transportation batten; 2 — plastic strap; 3 — MOV USB device.
Device position during transportation
Figure 12
1
2
3
Summary of Contents for 7517A
Page 2: ......
