38
|
Regency Plateau® PTO50 Outdoor Gas Fireplace
|
38
installation
919-777
04.10.17
1. Identify all 4 Part As from both kits. Cut along the perforation on each
set so the modifi ed tops and bottoms will be opposing one another as
shown below.
Diagram 3 - Corner supports on lower frame.
Diagram 5 - Install Inside vertical supports
Diagram 1 - Part A cut marks
Diagram 2 - Part A (x4) cut-ready to assemble
Diagram 4 - Attach 4x Part B to lower
Part A with 4 screws each
Part A - cut line
Top
Bottom
Part A - cut line
Diagram 6 - Outside vertical supports
Diagram 4- Corner supports (Part B) screw
locations
Diagram 6 - Inside vertical support (B2)
screw locations
2. Position each corner vertical support (Part B) on lower frame and
secure with four (4) screws each.
NOTE:
se the new holes on the base for the vertical supports closest
to the centre.
. Place top frame (Part A) onto corner vertical supports and secure to
each vertical support (Part B) with four (4) screws.
4. Install si ( ) inner vertical supports (B2 )- secure each support with
two (2) screws to top frame and two (2) screws to bottom frame.
. Install four (4) outer vertical supports (B1) - secure each support
with two (2) screws to top frame and two (2) screws to bottom frame.
Diagram 7- Install outside vertical supports (B1)
with 4 screws each
2
OUTDOOR BURNER
