34
|
Regency Plateau® PTO50 Outdoor Gas Fireplace
|
34
installation
2
OUTDOOR SERIES
919-775
04.03.17
9. Use the polyester weather cover when not operating the appliance by
sliding the cover over the glass surround on all 4 corners. Never oper-
ate the appliance with the polyester cover in place. This cover must be
removed when the appliance is in use.
7. Set the mid connector brackets in between the 2 assembled glass wind-
shields horizontally as shown below. Lift each end independently and slide
into position in the bracket. When the tops of both sections are even, tighten
the 2 Phillips head screws located on the mid connector. Maintain the 1/2"
gap between the glass and the table top throughout the glass surround.
1/2" gap
8
.
Place assembled glass surround/windshield on table top - ensure glass
is centered around burner. Once in correct position, carefully lift up one
end, apply double sided tape that has been cut to size, to the bottom of
the corner brackets. Repeat process on other end. Press down fi rmly
from to secure glass surround/windshield in position.
Use care not to scratch surfaces.
Mid connector
bracket
Use the supplied jig to support the 2 glass sections when installing the
Mid connector bracket-this will keep the 2 glass sections level
