![Regency Fireplace Products Plateau PTO50 Owners & Installation Manual Download Page 32](http://html1.mh-extra.com/html/regency-fireplace-products/plateau-pto50/plateau-pto50_owners-and-installation-manual_1433974032.webp)
32
|
Regency Plateau® PTO50 Outdoor Gas Fireplace
|
32
installation
OPTIONAL GLASS SURROUND/WINDSHIELD INSTALLATION PTO50
1
OUTDOOR SERIES
919-765
03.13.17
OPTIONAL GLASS SURROUND/WINDSHIELD INSTALLATION
1.
Remove metal fasteners from the corner brackets.
2.
Assemble the 4 pieces of the glass surround/windshield and fasten
together with 4 corner top brackets and supplied nylon fasteners as
shown below.
3.
Using a flat screwdriver, secure 4 top corner brackets with nylon
fasteners in each corner, bracket should be flush with the top of glass
as shown below.
5.
Secure bottom corner brackets with nylon fasteners in each corner.
6.
Flip the glass back over and place on a soft surface. The glass is now
right side up. The glass should be raised up 1/2" in bracket as shown
below.
4b.
Use supplied spacer tool to determine where the bottom bracket
should be placed and secured.
4a.
After the 4 top brackets are installed - flip over and place on a soft
surface, to install the 4 bottom brackets.
7.
Place assembled glass surround/windshield on table top - ensure glass
is centered on the table top. Once in correct position, lift up one end,
apply double sided tape that has been cut to size, to the bottom of the
brackets. Repeat process on other end. Press down firmly from to
secure glass surround/windshield in position. Use care not to scratch
surfaces.
1/2"
Insert nylon fastener
here.
Spacer tool
Bottom Bracket
Top Bracket
Nylon fasteners
Nylon fasteners
PTO 50
Part No. 646-932
Overall Dimensions: 58-15/16" long x 12-13/16" wide x 5-5/16" high
4 Piece Glass Surround