Regency Plateau® PTO50 Outdoor Gas Fireplace
|
33
33
|
installation
OPTIONAL GLASS SURROUND/WINDSHIELD INSTALLATION PTO100
1
OUTDOOR SERIES
919-775
04.03.17
GLASS SURROUND INSTALLATION
1. Remove metal fasteners from the corner brackets.
2. Assemble the 3 pieces of the glass surround/windshield.
3. Using a fl at head screwdriver secure the 2 corner brackets with the nylon
fasteners in each corner. The corner brackets should be fl ush with the
top of the glass..
5. Secure corner brackets with nylon fasteners in each corner.
6. Flip both section of glass over again and place on a soft surface. The glass
is now right side up. The glass assembly should be sitting up 1/2" in bracket,
away from table top as shown below.
4b.
Use supplied spacer tool to determine where the bottom bracket
should be placed and secured.
4a.
After the 2 top brackets are installed--gently fl ip over both sides over
and place on a soft surface, to install the 2 bottom brackets on each
side.
Spacer tool
Corner Bracket
Corner Bracket
1/2" gap
Insert nylon
fastener here.
Brackets fl ush with
glass
Nylon fasteners
Nylon fasteners
PTO 100 (2 x PTO50)
Part No. 646-942
Overall Dimensions: 116-1/2" long x 12-13/16" wide x 5-5/16" high
6 Piece Glass Surround
NOTE:
Due to the size/weight of this glass barrier--to avoid any breakage, have 2 people available to complete this installation.
Top
Bottom
