Regal Velvet Drive 3007000E01, Service Manual, Page: 56 / 72

54
T R A N S M I S S I O N S
®
STEP 37A. Electric Shift:
Be sure cartridge screen is clean. Insert cartridge into
port and torque to spec in Table 4.
Slide coils over cartridge stem. Be sure you have the
spacer washer between the 2 coils. Position coils as
needed and tighten nut to spec in Table 4.
STEP 38. For 72LH Only . Slide coupling on output
shaft . Thread nut on output shaft . Tighten nut to torque
shown in Table 4 .
For 72LHP . Slide coupling onto shaft . Insert alignment
washer and bolt . See torque spec shown in Table 4 .
STEP 39. Install dipstick in side of case . Turn handle
until snug . Do not over tighten .
Section I Assembly