46
T R A N S M I S S I O N S
®
Section I
Assembly
STEP 5.
Starting with a friction clutch plate , alternately
stack friction clutch plates and steel clutch plates .
Steel clutch plates are designed with 3 missing teeth
120° apart . When installed in a ring gear, they should
be installed with the missing teeth aligned with the 3
large drain holes as shown in detail “C” .
STEP 6.
Install Clutch plates and pressure plate in ring
gear .
STEP 7.
Install spacer ring 4755 in ring gear .
STEP 8.
Lubricate O-ring lightly with vasoline and install
in groove of forward clutch cylinder .
Forward Clutch Pack Arrangement: Figure B
Detail C
Forward Clutch Pack Arrangement: Figure A
Forward Clutch Pack Assembly
Snap Ring Installation
O-Ring Installation
CAUTION
CAUTION: Several different snap
rings are used to assemble the
clutch group. They have different
thickness. Be sure the correct snap
ring is used.
Summary of Contents for Velvet Drive 3007000E01
Page 2: ......
Page 43: ...41 T R A N S M I S S I O N S 72 LVTS...
Page 59: ...57 T R A N S M I S S I O N S Section II Installation...
Page 71: ......