Regal Velvet Drive 3007000E01, Service Manual, Page: 10 / 72

8
T R A N S M I S S I O N S
®
Section II Inspection
GENERAL
The transmission, cooler, cooler lines, and control link-
age should be inspected at regular intervals . Regular
inspections will ensure proper operation and help
detect minor problems that can be corrected before
they cause a transmission failure .
SCHEDULED INSPECTIONS (see table 2)
The following recommended inspection intervals are
based on normal operating conditions . Intervals should
be adjusted for extremes of temperature or other
adverse operating conditions .
Table 2. Scheduled Inspections
Inspection Task
Inspection Interval
Weekly
Periodic
(1 month or 100 hours,
whichever comes first)
Safety
(annual or 1000 hours,
whichever comes first)
GENERAL
Inspect control linkage and shift lever for operation.
Therese should be no sticking, binding, or looseness.
OIL COOLER AND LINKS
Inspect cooler for signs of leakage, damage, or loose
mounting bolts.
Inspect all connection points for signs of leakage.
TRANSMISSION
Inspect for damage or signs of leakage around
housing and/or bolts.
Remove dipstick. Check oil for signs of water or other
contaminants. Check (smell) oil for signs of burnt oil
(overheating). If found, replace fluid.
See Maintenance.
WARNING
CAUTION
WARNING: Failure to perform these
inspections at required intervals can
result in injury to personnel.
X X
X X
X
X
X
X
X
CAUTION: Failure to perform these
inspections at required intervals can
result in transmission failure.
CAUTION
CAUTION: If oil is discolored or has
been overheated (above 190°F) it
must be replaced.
CAUTION
CAUTION: Check mounting bolts for
tightness. If loose, tighten to torque
specified in OEM manual.