51
T R A N S M I S S I O N S
®
STEP 25.
Install reverse clutch pressure plate in case
with three half moons aligned with dowel pins . Be sure
all springs are seated in their holes .
STEP 26.
Lubricate sealing ring with vasoline and install
in groove of reverse clutch piston .
NOTE:
be sure sealing ring is not twisted, cut or
distorted . Replace if damaged .
STEP 27.
If removed, press needle bearing into
adapter . Needle bearing must be installed flush against
bore shoulder of adapter .
Lubricate O-ring with vasoline and install in groove of
adapter .
NOTE:
Be sure O-ring is not twisted, cut or distorted .
Replace if damaged .
If removed, install dryseal plug in adapter .
STEP 28.
Install reverse clutch piston in adapter .
Lightly coat gasket with vasoline and place on adapter .
Section I
Assembly
Pressure Plate Installation
Sealing Ring Assembly
Sealing Ring Installation
Reverse Clutch Piston Assembly
Summary of Contents for Velvet Drive 3007000E01
Page 2: ......
Page 43: ...41 T R A N S M I S S I O N S 72 LVTS...
Page 59: ...57 T R A N S M I S S I O N S Section II Installation...
Page 71: ......