49
T R A N S M I S S I O N S
®
STEP 16.
Install selected snap ring(s) in groove of
ring gear . Repeat step till proper clutch end play is
achieved .
STEP 17.
If removed, press forward clutch hub on drive
gear assembly and against shoulder .
Install snap ring in groove of drive gear assembly .
Lubricate sealing rings with vasoline and install in
grooves of drive gear assembly .
Compress each sealing ring until it locks in place .
STEP 18.
Install drive gear assembly in clutch assembly .
Slide bearing down drive gear assembly .
Place complete assembly in press . Press bearing into
drive gear assembly until seated against shoulder .
STEP 19.
Install snap rings in grooves of drive gear
assembly and forward clutch cylinder .
STEP 20.
Apply vasoline to bronze thrustwasher . Install
over end of shaft and against face of gear .
Section I
Assembly
Snap Ring Assembly
Sealing Ring Installation
Bearing Installation
Snap Ring Installation
Thrustwasher Assembly
Summary of Contents for Velvet Drive 3007000E01
Page 2: ......
Page 43: ...41 T R A N S M I S S I O N S 72 LVTS...
Page 59: ...57 T R A N S M I S S I O N S Section II Installation...
Page 71: ......