52
i) Stopping the vehicle
To stop the vehicle, proceed as follows:
•
Release the throttle/brake lever on the remote control so that it is in the neutral position, and then let the vehicle
coast to a standstill.
•
Once the vehicle is stationary, turn it off using the on/off switch on the bottom of the vehicle (move the switch to the
"O" position, see diagram in section 10. e).
Do not reach into the wheels or drive components or move the throttle/brake lever on the remote control.
•
Disconnect the battery from the vehicle. Ensure that the plug-in connector is fully disconnected.
•
Switch off the remote control.
Warning!
The motor, speed controller and vehicle battery become very warm during use! Do not touch these parts
immediately after use – burn hazard!