39
1.30.2 Myzone
-
Wiring connection to Haier units
Unit Make
Connection
Haier
1.
Connect a shielded, 2 core, twisted pair control cable from the CM225 / CM325HI to the
A / B terminals on the Haier Interface board YCJ
-
A002. Connect the interconnecting
cable supplied by Haier to CN24 in the fan coil unit of the Haier Interface board YCJ
-
A002.
Set the dipswitches as shown below. Polarity is critical.
Fig (N) - Myzone CM225 / CM325HI
Fig (L)
Haier Interface board
Model: YCJ
-
A002 (Fisher & Paykel part
no. 51102 )
Shielded, 2 core, twisted pair control cable
(not supplied)
B
A
Correct polarity
CN24
Fig (M) Haier FCU board
Interconnecting cable
supplied by Haier.
Requires the plug to
be cut off to connect
to the Haier interface
Dipswitch all=OFF
1 = OFF
A
B
