92
4.6 Adjusting temperature controlled zones
Indicates current
zone being adjusted.
Indicates current temperature set point required for
this zone.
Press here to allow Myzone
to automa cally control the
temperature in this zone.
Indicates the actual
temperature in this
zone (as measured by
Myzone).
Scroll up or down to see more
zones.
Myzone
Inventive
.
Intelligent
.
Intuitive
Press here to increase the current zone
set point temperature.
Press here to decrease the current zone
set point temperature.
Press here to select this zone as the
master (only available if configured for
Master AC unit control).
Indicates the current
temperature of the air
inside the air condi oning
system ductwork.
Press here to go back to the
zone summary.
Indicates ba ery in the sensor serving
this zone requires replacement. (only if
RF sensor is installed)
Indicates RF strength from sensor
serving this zone is acceptable (only if
RF sensor is installed.)
Press here to fully
open this zone.
Master
Climate
Press here to close this zone.
