85
3.7 Myzone Naked 400 remote
-
Configuration
a) It will take around 5 minutes to complete Auto
configura on. If you press any bu on and Zones 12, 13,
& 14 are s ll flashing rapidly this indicates the system is
s ll configuring.
1. To pair the remote to the system . Press and hold the
pair bu on on the remote and at the same me press the
pair bu on on the CM225 module. Zone 1 will flash blue
rapidly. You can also press the AC pair bu on on a touch
screen if one is fi ed to the system.
Note:
Zone 1 will be set as the
default constant zone when
Auto configured.
Hint:
Configure in this order:
1.
Pair the remote to the CPU
first.
2.
Force Auto configuration
3.
Test air flows to each zone
and fit zone labels onto the
back of the remote
.
4. To force the system to Auto configure:
a) Press and hold the Up bu on then press and release the
pair bu on.
b) Zones 12, 13, & 14 will flash rapidly indica ng the system
is Auto configuring.
