68
3.2.1 Sensor configuration
Hold down the “Pairing Bu on” on the Myzone
wireless device. (see 3.2.2).
Then press here to pair the device to your Myzone
system
Displays the Radio frequency
channel the system has been
configured to. This channel can be
changed if RF interference is being
experienced.
If the channel is changed all
wireless devices need to be paired
Indicates the status of the ba ery in the
sensor in this zone
Touch here to go back and save any
changes.
Myzone
Inventive
.
Intelligent
.
Intuitive
AC Unit Control
Myzone
Inventive
.
Intelligent
.
Intuitive
Sensor battery status : Good
Change Rf Channel 1
Pair wireless device
Kitchen
Signal strength : 100%
Calibrate Sensor - 0.2 C
Indicates the status of the wireless
signal strength from the sensor in
this zone. It can take up to 10
minutes of normal opera on to get
an accurate reading. To speed up
the process press the Off / Auto
bu on on the sensor 5 mes.
Press here to adjust the calibra on of
this sensor (See 3.2.3)
Press here to change the Rf Channel
