77
3.4 System Options (Locks & Non Standard Damper Motors)
Touch to lock the AC Unit. You will need
to enter a PIN number and then the
number of days you want the system to
operate for, un l it is automa cally
locked off. Do not forget your PIN.
Service charges will apply for a
technician to a end site to unlock your
system.
Touch here to set limits for set point adjustment
and to lock this seEng
Touch here to go back to the previous
configura on page
AC Unit Control
Myzone
Inventive
.
Intelligent
.
Intuitive
Myzone
Inventive
.
Intelligent
.
Intuitive
Note:
Information on the
configuration screen
may vary depending
which devices are
connected to the
system and which
model of Myzone you
have
System Options
Locks
Temperature Adjustment
Airflow Adjustment
System Lock Out
Touch here to lock airflow adjustment. You can lock
minimum airflow only or both minimum and
maximum air flow adjustments
Damper Control Type
Timing Dampers
Select here for non standard dampers
such as Belimo.
You will need to type in the drive me
in seconds from fully closed to fully
open.
Please note this will change the ming
for all motors in the system so you
cannot have a mix of different motors
on the same system when using this
feature.
The damper fault detec on is ignored
when this mode is used.
