102
4.16 Myzone Naked 400 remote
-
User manual
Press to toggle the maximum airflow in
the current zone
Flashing red indicates this zone is faulty
Press here to move up to the next zone or if pressed a er the
air% bu on it will increase the maximum airflow %
Press the enter bu on to send the changes. If the enter bu on
is not pressed the changes will be sent a er approximately 10
seconds
Solid red indicates this zone is currently
closed
Press here to toggle through the zones
If two LED’s are illuminated the seEng is in
the middle (eg.95%)
Press to open the current zone
Press here to move down to the next zone or if pressed a er
the air% bu on it will decrease the maximum airflow %
Press to close the current zone
Solid green indicates this zone is currently
open
Solid blue indicates this zone is currently in
climate control mode. You are not able to
change the zone setpoint temperature with
this remote control. If you change this zone
you can only toggle between open and
closed
Indicates maximum air flow that the zone
has been set to
Pair bu on only to be used for
configura on
